After-sales Service: | Provided |
---|---|
Warranty: | 1 Year |
Certification: | ISO9001 |
Condition: | New |
Maximum Lifting Height: | 30-40m |
Maximum Lifting Weight: | >16t |
Customization: |
---|
Suppliers with verified business licenses
1.The total rated loads given in the rated load charts are the maximum lifting capacity when the crane is set up on firm and level ground, which includes the weight of the hook block and slings. The weight of above-mentioned devices should be deducted to correctly calculate the load weight.
2. The working radius shown in the rated load charts is the radius when the load is lifted off the ground, and it is the actual value including loaded boom deflection.
3. A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2).
4. Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
5. Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
Item
|
|
Unit
|
|
Dimensions
|
Overall length
|
12100
|
mm
|
Overall width
|
2980
|
mm
|
|
Overall height
|
3530
|
mm
|
|
Weight
|
Dead weight in travel state
|
38350
|
kg
|
1st axle
|
17750
|
kg
|
|
2nd axle
|
20750
|
kg
|
|
Travel
|
Max.travel speed
|
≥35
|
km/h
|
Min.turning diameter
|
≤5.5
|
m
|
|
Min.ground clearance
|
460
|
mm
|
|
Approch angle
|
25.8
|
°
|
|
Departure angle
|
21.8
|
°
|
|
Max.gradeability
|
≥55
|
%
|
|
Lifting Performance
|
Max.total rated lifting load
|
50
|
t
|
Min.rated working radius
|
3
|
m
|
|
Turning radius at swing table tail
|
4090
|
mm
|
|
Base boom amx.load moment
|
1690
|
kn.m
|
|
Base boom
|
10.3
|
m
|
|
Full-extended boom
|
38.2
|
m
|
|
Full-extended boom+Jib
|
55
|
m
|
|
Outrigger longitudinal distance span
|
7
|
m
|
|
Working speed
|
Boom elevating time
|
≤80
|
s
|
Boom telescoping time
|
≤120
|
s
|
|
Max.swing speed
|
≥2.0
|
r/min
|
Suppliers with verified business licenses