| After-sales Service: | Provided |
|---|---|
| Warranty: | 1 Year |
| Certification: | ISO9001 |
| Condition: | New |
| Maximum Lifting Height: | 30-40m |
| Maximum Lifting Weight: | >16t |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
1.The total rated loads given in the rated load charts are the maximum lifting capacity when the crane is set up on firm and level ground, which includes the weight of the hook block and slings. The weight of above-mentioned devices should be deducted to correctly calculate the load weight.
2. The working radius shown in the rated load charts is the radius when the load is lifted off the ground, and it is the actual value including loaded boom deflection.
3. A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2).
4. Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
5. Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
| Unit |
Value |
Remarks | |
|---|---|---|---|
| Working performance | Max.rated lifting capacity | kg | 70000 |
| Max.load moment of basic boom | kN.m | 2352 | |
| Max.load moment of main boom(fully extended) | kN.m | 1098 | |
| Max.load moment of basic boom | m | 12.2 | |
| Max.lifting height of main boom | m | 44.2 | |
| Max. lifting height of jib | m | 60.2 | |
| Working speeds | Max.hoist rope speed(Main winch) | m/min | ≥135 |
| Max.hoist rope speed(Auxiliary winch) | m/min | ≥110 | |
| Boom demrricking up time | s | 57 | |
| Boom demrricking up time | s | 107 | |
| Slewing speed | r/min | 1.8 | |
| Driving parameters |
Max. driving speed | km/h | 75 |
| Max. gradeability | % | 37 | |
| Min. Turning diameter | m | 24 | |
| Min. ground clearance | mm | 280 | |
| Oil consumption per hundred kilometers | L | 46 | |
| Mass | Deadweight in driving condition | kg | 45000 |
| Complete vehicle kerb mass | kg | 44870 | |
| Front axle load | kg | 19000 | |
| Rear axle load | kg | 26000 | |
| Dimensions | Overall dimensions(L×W×H) | mm | 14100×2750×3750 |
| Longitudinal distance between outriggers | m | 6.00 | |
| Transversal distance between outriggers | m | Fully extended:7.6, Half-extended:5.04 |
|
| Tail slewing radius | mm | 4020 | |
| Boom length | m | 11.4- 43.0 | |
| Boom angle | ° | -2- 80 | |
| Jib length | m | 9.5,16.0 | |
| Offset | ° | 0,30 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}