Remote Control Truck Crane 25ton Qy25K5d Crane Machine for Sale

• After-sales Service: Online Support
• Warranty: 1 Year
• Certification: GS, RoHS, CE, ISO9001
• Condition: New
• Maximum Lifting Weight: 25ton
• Shaft Number: 3
• Model NO.: QY25K5D
• Type: Straight Arm
• Wheel Base: 4600+1350mm
• Engine Model: Sc7h300q6p
• Rated Power/Rpm: 220/2200kw/(R/Min)
• Max. Output Torque/Rpm: 1280/1200-1500n.M/(R/Min)
• Max. Travel Speed: >=80km/H
• Max. Load Moment: 1063kN.M
• Fully-Extended Boom + Jib: 47.4m
• Transport Package: Comply to All Shipping
• Specification: 13050× 2550× 3500mm
• Trademark: CRUKING
• Origin: China, Xuzhou
• HS Code: 8705109100
• Production Capacity: 1000 Units Per Month

Product Description

 Official manufacturer QY25K5D 25 ton truck crane machine

Product Description

QY25K5D truck crane is the product with high reliability inheriting classical and advanced technology about design and manufacture truck crane of many years and based on mature technology. Special truck crane chassis designed and manufactured by our company, all covered working surface and classic K-series appearance outline are equipped.
The operations of crane are very simple, convenient and flexible. It is widely used for lifting operation and installation work in urban renewal, transportation, ports, bridges, oilfield, industrial and mining enterprises, etc.

Notes

1.The total rated loads given in the rated load charts are the maximum lifting capacity when the crane is set up on firm and level ground, which includes the weight of the hook block and slings. The weight of above-mentioneddevices should be deducted to correctly calculate the load weight.

2.The working radius shown in the rated load charts is the radius when the load is lifted off the ground, and it is the actual value including loaded boom deflection.

3.A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2).

4.Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.

5.Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.

6.The boom length given in the rated load charts should accord with the telescoping code of boom sections .

Product Parameters

Description		Unit	Parameter value
Overall length		mm	12650
Overall width		mm	2500
Overall Height		mm	3380
Wheel Base		mm	4425+1350
Track		mm	2074/1834/1834
Total vehicle mass in travel configuration		kg	29400
Axle load	Front axle	kg	6600
	Rear axle		22800
Engine Model			SC8DK280Q3
Engine rated power		kw/(r/min)	206/2200
Engine rated torque		N.m/(r/min)	1112/1400
Max. travel speed		km/h	75
Min. travel speed		km/h	2.9
Min. turning diameter		m	22
Min. ground clearance		mm	260
Max. grade ability		%	30
Approach angle		°	16
Departure angle		°	13
Braking distance (at 30 km/h, full load )		m	≤10
Oil consumption per 100km		L	≤37
Exterior noise level during acceleration traveling		dB (A)	84
Noise level at seated position		dB (A)	90

Detailed Photos

 

 

 

Company Profile