| Customization: | Available |
|---|---|
| After-sales Service: | Video Technical Support,Online Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.The total rated loads given in the rated load charts are the maximum lifting capacity when the crane is set up on firm and level ground, which includes the weight of the hook block and slings. The weight of above-mentioned devices should be deducted to correctly calculate the load weight.
2. The working radius shown in the rated load charts is the radius when the load is lifted off the ground, and it is the actual value including loaded boom deflection.
3. A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2).
4. Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.
5. Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.
|
Max. lifting capacity
|
160t
|
|
Overall length
|
15469mm
|
|
Overall width
|
3000 mm
|
|
Overall height
|
4000mm
|
|
Axles
|
5
|
|
Axle distance-1,2
|
2100mm
|
|
Axle distance-2,3
|
3270mm
|
|
Axle distance-3,4
|
1450mm
|
|
Overall weight
|
55000kg
|
|
Front axle load
|
10000/10000kg
|
|
Rear axle load
|
13000/13000/9000kg
|
|
Model
|
|
|
Emission standard
|
Euro III
|
|
Max. traveling speed
|
80 km/h
|
|
Min.turning radius
|
11.5m
|
|
Min.turning radius of boom head
|
14.4 m
|
|
Drive train
|
10 × 6 × 6
|
|
Min. ground clearance
|
310mm
|
|
Approach angle
|
19 °
|
|
Departure angle
|
15 °
|
|
Max. gradeability
|
40%
|
|
Fuel consumption per 100km
|
≤ 78L
|
|
Temperature range
|
- 0.5°~ + 82°
|
|
Min.lifting radius
|
3m
|
|
Tail swing radius of superstructure
|
4.91m
|
|
Boom section
|
6
|
|
Boom shape
|
U-shaped
|
|
Max. lifting moment-Base boom
|
6000kN·m
|
|
Max. lifting moment-Full-extend boom
|
3042kN·m
|
|
Max. lifting moment-Full-extend boom+jib
|
1827kN·m
|
|
Length-Base boom
|
13.55m
|
|
Length-Full-extend boom
|
63m
|
|
Length-Full-extend boom+jib
|
99m
|
|
Outrigger span(Longitudinal/Transversal)
|
7.8×8.0m
|
|
Jib offset
|
0 ° 20 ° 40 °
|
|
Max. single rope lifting speed of main winch(no load)
|
135m/min
|
|
Max. single rope lifting speed of auxiliary winch(no load)
|
135m/min
|
|
Full extend/retract time of boom
|
500s
|
|
Full raise/lower time of boom
|
60s
|
|
Swing speed
|
1.6 r/min
|
|
HVAC in up cab
|
Cooling / Heating
|
|
HVAC in low cab
|
Cooling / Heating
|
){kind=link}