| After-sales Service: | Free Accessories Are Provided During The Warranty |
|---|---|
| Warranty: | 1 Year |
| Type: | Crawler Excavator |
| Usage: | Special Excavator, Marine Excavator, Mining Excavator, GM Excavator |
| Bucket: | Grab Shovel |
| Transmission: | Hydraulic Transmission |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier High-end system configuration
1. High pressure common rail electronic injection engine features high power reserve and strong power.
2. The full set of negative-flow system features high stability and reliability and is the golden configuration among the products of same tonnage.
3. This machine features high system pressure, high flow, and fast motion response, with maximum digging force up to 105KN.
4. The comprehensively optimized working device and the cast shaft seats for boom and arm feature high strength, good wear resistance, and long life.
5. The two-sided support track rollers in place of carrier rollers, two one-sided track guides, and the reinforced X-frame are installed to adapt to severe working conditions.
6. The optional 0.65m3 rock bucket is designed specially for rock working condition.
Enhanced working device
1. The structures of critical portions are comprehensively optimized and the load-carrying positions are reinforced to resist against severe working conditions.
2. The baseplates, side plates, and reinforcement plates of bucket are made of high-strength wear-resistant material to improve the durability of bucket.
3. Based on the digging path of the bucket, the bucket structure is optimized to reduce the digging resistance and improve the digging efficiency.
4. The H-shaped track frame features strong carrying capacity and reasonable machine load distribution. The track frame is equipped with standard boarding footplate to mitigate the user's labor strength and improve the user satisfaction.
Optional attachments
Breaking hammer, ripper, timber grab, stone grab, quick change coupling, hydraulic tamper, quick change coupling, and breaking hammer pipeline.
| Parameters of SHANTUI Excavator | |||||
| SE60 | SE75 | SE135(standard) | SE135W(wechai) | SE150 | |
| Overall Dimensions | |||||
| Overall Length(mm) | 5855 | 6240 | 7860 | ||
| Ground Length(During transport)(mm) | 3330 | 3750 | 4320 | 4390 | |
| Overalll Height(To the top of Boom)(mm) | 2060 | 2660 | 2800 | 2860 | |
| Overall Width(mm) | 1880 | 2260 | 2500 | 2645 | |
| Overall Height(To top of cab)(mm) | 2585 | 2680 | 2855 | ||
| Ground Clearance of Conterwight(mm) | 710 | 825 | 915 | ||
| Min.Ground Clearance(mm) | 300 | 385 | 425 | ||
| Tail Turning Raidius(mm) | 1655 | 1880 | 2380 | ||
| Track Length(mm) | 2560 | 2820 | 3645 | ||
| Track Gauge(mm) | 1480 | 1800 | 2000 | ||
| Track Width(mm) | 1880 | 2250 | 2500 | ||
| Standard Track Shoe Width(mm) | 400 | 450 | 500 | ||
| Turntable Width(mm) | 1780 | 2230 | 2490 | 2645 | |
| Distance from slewing center to tail(mm) | 1655 | 1850 | 2375 | ||
| Working Range | |||||
| Max. digging height(mm) | 5785 | 6945 | 8495 | 8670 | |
| Max.dumping height(mm) | 4075 | 4895 | 6060 | 6210 | |
| Max.digging depth(mm) | 3850 | 4120 | 5490 | ||
| Max.vertical digging depth(mm) | 3000 | 3620 | 4625 | ||
| Max.digging distance(mm) | 6200 | 6360 | 8300 | ||
| Max.digging distance at ground level(mm) | 6060 | 6205 | 8175 | 8325 | |
| Working device minimum turning radius(mm) | 2395 | 2040 | 2445 | 2395 | |
| Max. lifting height of bulldozer blade(mm) | 385 | 385 | -- | ||
| Max.digging depth of bulldozer blade(mm) | 465 | 225 | -- | ||
| Engine | |||||
| Type | 4-Cylinder inline and turbocharged | Water-cooled and turbocharged | 4-cylinder inline and water colled and turbocharged | Inline 4-cylinder,high pressure common rail,and water-cooled and turbocharged | |
| Displacement(L) | 2.615 | 3.3 | 3.76 | ||
| Rated Power(kw/rpm) | 36/2000 | 48.9/2000 | 86/2200 | 92/2200 | 86/2200 |
| Hydraulic System | |||||
| Type of Hydraulic pump | Variable displacement plunger pump | Axial variable plunger pump | Variable displacement duplex plunger pump | ||
| Rated working flow(L/min) | 152 | 160 | 2 x 130 | ||
| Bucket | |||||
| Bucket Capacity(m3) | 0.18-0.22 | 0.25-0.35 | 0.4-0.65 | 0.65 | |
| Swing System | |||||
| Max.swing speed(r/min) | 11 | 11.3 | |||
| Brake Type | Mechanically applied and pressure released | ||||
| Digging Force | |||||
| Bucket arm digging force(KN) | 29 | 44 | 70 | ||
| Bucket digging force(kN) | 48 | 66 | 97 | ||
| Operating Weight and Ground Pressure | |||||
| Operating Weight(kg) | 5960 | 7650 | 13500 | 14500 | |
| Ground Pressure(kPa) | 33 | 34 | 41.5 | 43.8 | |
| Traveling System | |||||
| Traveling Motor | Axial variable displacement plunger moter | ||||
| Traveling Speed(km/h) | 2.7/4.6 | 2.9/4.8 | 3.25/5.2 | 3.25/5.3 | 3.25/5.2 |
| Traction Force(KN) | 50 | 86.5 | 118 | ||
| Gradeability | 70%(35°) | ||||
| Tank Capacity | |||||
| Fuel tank capacity(L) | 95 | 155 | 220 | 245 | 220 |
| Cooling System(L) | 8.5 | 11 | 20 | ||
| Engine oil capacity(L) | 9 | 11 | |||
| Hydraulic oil tank/system capacity(L) | 74/110 | 96/130 | 177/205L | ||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}